Learn along with other makers as you participate in this live video conference class taught by Kelly Parker while you chat with your classmates from around the nation and world in real-time. There is a lot of interaction, and you’ll get to watch and engage with Kelly as she leads you through the process of making oval shaker boxes using basics tools. Kelly will be leading this from her workshop in Missouri where she is a master furniture maker.
The class is split into manageable sections of approximately two hours online followed by work periods where you will work at your own pace.
During this course, we will go over the traditional process of shaping the tails, hot water wood bending, and using copper tacks to make a series of boxes. You will need a very limited number of tools such as a drill and a small hammer (see full list below) and everything else is provided in the kit. This is a quiet, nonmessy process so you don’t need a big workshop or space.
You will learn to:
This class is open to all levels and is suitable for a wide range of ages.
We’ll have a “Tech Check” call a few days before the start of the class for you to verify your connection and get familiar with Zoom if you need to.
You’ll also be invited to join our private Facebook group where you can chat, post questions, and get advice outside of class hours. Come and join the quarantine team!
Finally, will we record each day, so that you can refer back to it as you work through your assigned tasks and homework.
Class Schedule & Times
The class is broken up into sections over two days. Plan on attending all of them all, just like you would in real-time.
All times are shown in Eastern Standard Time (EST)
Tools & Materials Needed:
Laptop with a camera and wifi access
Hot plate or some way to maintain the temperature of the hot water in the galvanized tray for 15 – 20 mins
Tongs to get wood out of hot water
Sharp pencil to mark the lines.
Coping saw or a sharp utility knife
Small clamp for pipe
Rasps – 1 coarse, 1 medium flat faced
Small powered drill
Yellow glue (very small amount needed)
The finish of your choice
Registration includes $80 Oval Shaker Box kit + Shipping (cherry bands, cores for 3 different sized boxes), shaper and finger patterns, 32″ galvanized tray, tac pack, pipe, sanding block, sandpaper, drill bit).