Ideal Tools to bring | What is Available At Florida School Of Woodwork |
Dovetail Saw | Variety available in Community Tool Area |
Tenon Saw | Available at each student bench |
Chisels 1”, 3/4”, 1/2”, 3/8”, 1/4” ( if you don’t have both a 1” and 3/4” either one is fine) | Set of 4 Narex chisels at each student bench. These are METRIC. |
Good 12” Square (ideally a Starrett 4R Graduation) | 6″ I gauge and 12″ Square at each student bench |
Marking Knife | Available at each student bench |
Joiners Mallet | Available at each student bench |
No 4 or 4 1/2 Smoothing plane (personal preference is Lie-Nielsen planes) | HNT Gordon A5 is available at each student bench several Lie Nielsen planes are in the community tool area |
Spokeshave | Available at each student bench |
Card Scraper | Available at each student bench |
Coping saw | Available at each student bench |
Cutting Gauge or Tite-mark circle cutting gauge | None |
Tape Measure | Available at each student bench |
Notebook and Pencil | None |
Optional tools, if you have them and can bring them | |
Jointer plane | We have five various brands |
Cabinet Scraper | We have three of these in the Community Tool Area |
Dividers | We do not have these |
Plough plane with 1/4” cutter | We do not have these |
Block plane | We have a variety, 50% of benches have a smaller block plane. |
Rabbet Block plane | Two in the Community Tool Area |
Large Router plane | We do not have these |
Your preferred sharpening stones (I will have some and the school has some if you can’t bring) | |
If you have any questions on this list or need help picking which tools to bring please feel free to email me (Frank) at [email protected] or text me at 254-366-3708 | |
Also, I have a few extra tools I can bring if need be and the school has lots of tools as well. | |
2022-09-02